Every cleaning contract ends up with the same conversation. The client says a room wasn't done; your supervisor says it was. Without evidence, the client usually wins, and you issue a credit note.
Proof of work changes that conversation. This guide compares the three common ways to prove a clean, and explains how to combine them so evidence is gathered without slowing the cleaner down.
| Method | What it proves | Good for | Watch out for |
|---|---|---|---|
| NFC checkpoint | The cleaner was at that exact spot, at that time | Washrooms, plant rooms, floors in a large building | Tags need fitting and replacing if removed |
| GPS location | The phone was at the site | Arrival and departure, mobile teams moving between sites | Not precise enough to tell one room from another, weak indoors |
| Digital inspection | The work met the standard | Supervisor audits, client walk-rounds, photo evidence | Only as good as the checklist behind it |
None of the three is enough on its own. NFC proves presence, not quality. GPS proves the site, not the room. An inspection proves quality on the day it was done, not every day.
A small NFC tag is fixed at each point you want visited, such as each washroom or each floor. The cleaner taps the tag with their phone, which records the time and place and opens the task list for that area.
The result is a timed record of every checkpoint on every shift. If a client queries a washroom on the third floor, you can show who tapped in, at what time, and which tasks they ticked off.
Reslink supports both NFC tags and QR codes for checkpoints, so you can choose what suits each site.
GPS is better at the start and end of a shift than in the middle. It confirms a cleaner arrived at the right site, and it suits mobile teams who visit several small sites a day. Inside a large building it cannot tell one floor from another, which is why NFC does the room-level work.
Presence is not quality. A supervisor or the client still needs to check the standard. A digital inspection replaces the paper audit sheet with a form on the phone:
The follow-up step matters most. A paper audit records a problem; a digital one gets it fixed and shows when it was fixed.
The strongest setup uses all three, each for what it does best:
That combination gives you an answer to almost any client query within minutes.
Carlisle Support Services used to rely on paper reporting. With Reslink, its teams record before-and-after photos as proof of work, and digital audit trails replaced paper logs. The result has been fewer disputes and more open, data-led conversations with clients. Read the Carlisle case study.
They prove different things. GPS shows the cleaner reached the site; NFC shows they visited each area. Most contracts benefit from both.
No. Passive NFC tags have no battery. The phone powers the read when the cleaner taps the tag.
QR codes are an alternative. They can be printed and fixed in place, and Reslink supports both NFC tags and QR codes.
Related guides: Client reporting for cleaning contracts and Cleaning staff scheduling software: a UK buyer's guide.
Book a demo to see proof of work set up for one of your own sites.